Clover Technologies Group PAC0820 Bedienerhandbuch PDF herunterladen (Seite 73)

- 73 -

Step 5: Examine the IP address, subnet mask, and default gateway on the PC.

Step 6: Set the corresponding IP address, subnet mask, and default gateway on the

DVR (refer to 5.5.5 Network Setup). If the subnet mask and default gateway on DVR

are the same with those of the PC, then the IP address must be in the same network

section but cannot be the same with the used one. Otherwise, it will cause IP address

conflicts. Take the figure above as an example, the IP address should be: 192.168.0.X,

wherein, X cannot be 40 or 1 (including other IP addresses currently being used), and

cannot surpass 255, the subnet mask is 255.255.255.0, and the gateway is

192.168.0.1.

6.4 Control Download and Installation

After finishing the aforementioned settings, open the IE browser, input

http://192.168.0.X

(192.168.0.X is the setting IP address of the DVR) and confirm. If

the http port of DVR setting has been changed (not 80); you must add colon + port

number (assume that the current port number is P), like http://192.168.0.X:P

, for

correct visit. Then, the network will download and install the control automatically.

After connecting to the internet, IE will automatically download the file to PC as

follows.

The system will automatically enter GUI as follows.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 102 103

Keine Kommentare

Clover Technologies Group PAC0820 Bedienerhandbuch Seite 73